Your browser is not supported. For the best experience, a newer version or another browser is recommended.
ECONECT PinBrazing with S15 Automatic Gun
ECONECT PinBrazing with S15 Automatic Gun
  • ECONECT PinBrazing with S15 Automatic Gun
  • S15 Automatic Brazing Gun
  • Carrying Harness for Econect
  • ECONECT PinBrazing with S15 Automatic Gun
  • Safetrack PinBrazing
  • Safetrack PinBrazing
  • Safetrack PinBrazing
  • Safetrack PinBrazing
  • Safetrack PinBrazing
  • Safetrack PinBrazing
  • Safetrack PinBrazing

ECONECT PinBrazing unit. S15 (auto), 60 Brazings

Part No 94365
Weight (kg) 21.5
E-mail for price
SEK
In stock
Product question

What would you like to know about ECONECT PinBrazing unit. S15 (auto), 60 Brazings?

Send

Description

ECONECT Digital PinBrazing unit is powered by a revolutionary new nano-battery with longer life than previous batteries. The weight is only 9,8kg (21,6Lb). Made for brazing pins without fusewires. Supplied with patented automatic brazing gun, S15 and constant control electronic.

The brazing pins without fusewires saves money for two reasons: lower purchase cost and no waste of misfired brazing pins.

The automatic brazing gun and electronic ensure correct brazing result and operation every time and is very easy to use.

Despite same (and even higher) brazing capacity than previous units the weight has been reduced with 60% which not only makes it ideal for maintenance work, but it can replace much larger units for larger works. Gazprom approved equipment. 

  • Environmental - Lead-free battery - Long life
  • Digitized - More safe brazings.
  • Energy efficient - 20% less energy consumption.
  • High capacity - 60 brazings / charge.
  • Ergonomic - Easy to carry.

Technical Specification:

Voltage 36 V DC
Number of brazes 60 per charge
Weight (incl.battery) 9,8 kg/21,6 Lb

Dimensions:

Width 150 mm
Height 280 mm
Length 320 mm

ECONECT SAFE 94365 is delivered with:

  • Braze pistol S15 Automatic SAFE 91015
  • Pinholder 8-9,5mm SAFE 9211
  • Ringholder 8-9,5mm SAFE 9202
  • Battery 1 pcs required SAFE 80982
  • Stationary charger 36V/115-230V SAFE 8048
  • Ground Super magnet SAFE 80730
  • Tool case SAFE 9524
  • Shoulder strap SAFE 9523

add below grinding machine.

Accessories:

  • Grinding machine BGD800 Makita SAFE 593070
  • Carrying harness for carry the Econect on the back SAFE 93690.
  • Ground Grip SAFE 8071
  • Grinding wheel, silicon free SAFE 8025
  • Carbide burr, type C SAFE 8014
  • Carbide burr, type C extended SAFE 8014XL
  • Pin holder 8-9,5 (A) SAFE 9211
  • Pin holder M8 (B) SAFE 9213
  • Pin holder M10 (C) SAFE 9215
  • Pin holder M12 (D) SAFE 9217
  • Ring holder 8-9,5 SAFE 9202
  • Ring holder M8/M10/M12 SAFE 9204
  • Extension set for S4 / 8-9,5 SAFE 9227
  • Extension set threaded pins SAFE 9229

Important properties of ECONECT©

Properties of the new Safetrack® Li-Ion battery for ECONECT©:

  • Flat discharge curve. 80% of the capacity of the battery can be used.
  • 5x higher energy per unit weight than lead-acid batteries.
  • Lifetime, 1000 cycles.
  • Low self-discharge, can be stored during long time.
  • Below +12°C(53°F) an automatic built-in preheating feature of the battery.
  • Switch on the unit and it automatically preheat the battery if necessary. Required preheating time is on the label on the unit.
  • Must be charged within a temperature range of 0 to 45°C (32 to 113°F).
  • Can be fast charged, no equalization charging needed. 2-3h charging.
  • Lithium ion batteries are environmentally friendly. Does not contain mercury, cadmium or lead, but will still have to be recycled.
  • Max temperature is +55°C(130°F).
More ...Close
SESwedish - SEK
Choose your settings
The product has been added to your shopping cart Show shopping cartCheckout