In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Search in results
Number of hits 12
59027BD
SAFEPLUG® M6 13,5-15,5 mm

Minimum order: 25 pcs

Delivery: 25 pcs per package

59028BD
SAFEPLUG® M6  16-17,5 mm

Minimum order: 25 pcs

Delivery: 25 pcs per package

59023BD
SAFEPLUG® BASIC M10 Single Drill hole ø13,5mm. 40Nm(30lb-ft)

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® BASIC has tinned contact surfaces and standard stainless steel bolts likewise SAFEPLUG® it has also the double contact feature.
1. Dual interfaces An additional conical tin-plated bushing pressed into the plug means that even the topside of the cable lug (via the nut and washer) will be part of the circuit.

2. Polished plug When the plug is installed will the flange of the plug automatically be polished by the installation tool. The cable lug will always be connected with an even and clean surface.

3. Tin-plated contact surfaces SAFEPLUG® BASIC plug bushings are tinned.

4. Stainless steel bolt SAFEPLUG® BASIC comes with stainless steel bolts and locking nuts.

5. Gas-tight joints All contact surfaces between the cable terminal, plug-rail is gas-tight, which is a requirement for the electrical connection is not degraded by corrosion.

6. No hydraulic tools There is no need of extra hydraulic tools in order to draw through the bush. Only a simple mechanical assembling tool is needed. Use the assembling tool together with a std. torque wrench or a powerful battery driven impact wrench.

59033BD
SAFEPLUG® HT M10 Single 70Nm High Torque. Drill hole ø13,5

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® is the new generation of connection plug with an optimum performance. SAFEPLUG® is developed to have as low transition resistans as possible between the cable lug and the rail in total and not as other plug system where they only show the resistans between the rail and the bush(that is mounted in the hole of the rail). The smart design double the contact pressure and contact surface. 100% plastic strained jointed together.

 

SAFEPLUG® is easily mounted with a simple torque wrench or use the powerful batterydriven impact wrench, SAFE 59110, in the drilled hole in the rail. SAFEPLUG® have, among others, following benefits compare other systems on the market:

• Double contact surface

• 70Nm Torque instead of others 40Nm.

• Double surface pressure, which ensure much better performance during temperature changes in the rail

• Simple to install - No special training needed

• Can be installed in any kind of weather

• The cable lug and the flange of the plug are polished during installation

• All contact surfaces are 100% plastic strained together

59033BDT
SAFEPLUG® HT M10 Single

Minimum order: 25 pcs

Delivery: 25 pcs per package

590260BD
SAFEPLUG® COMBI M10 Drill hole ø13,5mm. 40Nm(30lb-ft)

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

Flexible cable connections of one or more cables.

Flexible cable connections for the installation of one or more cables for rails in the same areas.
SafePlug® Combi provides that cables can be changed from one to another, and vice verca

Safeplug® Combi has the same technology to resist differences in temperature, vibration and corrosion as the rest of the SafePlug® range.
This is thanks to the revolutionnary patented contact cone technology.

 

SafePlug® Combi - A flexible system

  • Easy to replace individual cables
  • Secure against temperature changes
  • Designed for long life
  • Safe from vibrations in the rails
  • Tight connection– reduces the risk of corrosion
  • Maintains high contact pressure for its entire life
  • Acid proof stainless steel bolt
  • Counterhold in the bond when mounted
  • Contact cone for best conductivity
  • No heavy hydraulics when installing

 

Users do not have to use heavy hydraulics in the work place. Expanding

the copper bushing in the drilled hole in the rail by using the same torque wrench or impact wrench used to assemble the cables.

Means significantly lower investment costs as well as smaller service needs.

 

 

59021BD
SAFEPLUG® BASIC M12 Single Drill hole ø19mm. 80Nm(60lb-ft)

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® BASIC has tinned contact surfaces and standard stainless steel bolts likewise SAFEPLUG® it has also the double contact feature.

1. Dual interfaces An additional conical tin-plated bushing pressed into the plug means that even the topside of the cable lug (via the nut and washer) will be part of the circuit.

2. Polished plug When the plug is installed will the flange of the plug automatically be polished by the installation tool. The cable lug will always be connected with an even and clean surface.

3. Tin-plated contact surfaces SAFEPLUG® BASIC plug bushings are tinned.

4. Stainless steel bolt SAFEPLUG® BASIC comes with stainless steel bolts and locking nuts.

5. Gas-tight joints All contact surfaces between the cable terminal, plug-rail is gas-tight, which is a requirement for the electrical connection is not degraded by corrosion.

6. No hydraulic tools There is no need of extra hydraulic tools in order to draw through the bush. Only a simple mechanical assembling tool is needed. Use the assembling tool together with a std. torque wrench or a powerful battery driven impact wrench.

 

Le système de connexion par insert développé par SAFETRACK permet la liaison mécanique et électrique entre un câble et le rail.
Ce concept répond aux exigences toujours plus strictes des réseaux ferroviaires : fiabilité, résultat indépendant de l’opérateur, santé du rail préservée.
PRINCIPE DE L’INSERT

59031BD
SAFEPLUG® HT M12 Single 120Nm High Torque. Drill hole ø19mm

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® is the new generation of connection plug with an optimum performance. SAFEPLUG® is included in the SAFETRACK® Silver Bond© Line, together with the PINBRAZING and SAFEBOND® Systems. SAFEPLUG® is developed to have as low transition resistans as possible between the cable lug and the rail in total and not as other plug system where they only show the resistans between the rail and the bush(that is mounted in the hole of the rail). The smart design double the contact pressure and contact surface. 100% plastic strained jointed together. SAFEPLUG® is easily mounted with a simple torque wrench or use the powerful batterydriven impact wrench, SAFE 59110, in the drilled hole in the rail. SAFEPLUG® have, among others, following benefits compare other systems on the market: •  • Double contact surface • Double surface pressure • Simple to install - No special training needed • Can be installed in any kind of weather • The cable lug and the flange of the plug are polished during installation • All contact surfaces are 100% plastic strained together

59031BDT
SAFEPLUG® HT M12 Single

Minimum order: 25 pcs

Delivery: 25 pcs per package

590225BD
SAFEPLUG® COMBI M12 Drill hole ø19mm. 80Nm(60lb-ft)

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

Flexible cable connections of one or more cables.

Flexible cable connections for the installation of one or more cables for rails in the same areas.
SafePlug® Combi provides that cables can be changed from one to another, and vice verca

Safeplug® Combi has the same technology to resist differences in temperature, vibration and corrosion as the rest of the SafePlug® range.
This is thanks to the revolutionnary patented contact cone technology.

 

SafePlug® Combi - A flexible system

  • Easy to replace individual cables
  • Secure against temperature changes
  • Designed for long life
  • Safe from vibrations in the rails
  • Tight connection– reduces the risk of corrosion
  • Maintains high contact pressure for its entire life
  • Acid proof stainless steel bolt
  • Counterhold in the bond when mounted
  • Contact cone for best conductivity
  • No heavy hydraulics when installing

 

Users do not have to use heavy hydraulics in the work place. Expanding

the copper bushing in the drilled hole in the rail by using the same torque wrench or impact wrench used to assemble the cables.

Means significantly lower investment costs as well as smaller service needs.

 

 

59021
SAFEPLUG® BASIC M12 Single SS. Single.Drill ø19 - 80Nm

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® BASIC has tinned contact surfaces and standard stainless steel bolts likewise SAFEPLUG® it has also the double contact feature.

1. Dual interfaces An additional conical tin-plated bushing pressed into the plug means that even the topside of the cable lug (via the nut and washer) will be part of the circuit.

2. Polished plug When the plug is installed will the flange of the plug automatically be polished by the installation tool. The cable lug will always be connected with an even and clean surface.

3. Tin-plated contact surfaces SAFEPLUG® BASIC plug bushings are tinned.

4. Stainless steel bolt SAFEPLUG® BASIC comes with stainless steel bolts and locking nuts.

5. Gas-tight joints All contact surfaces between the cable terminal, plug-rail is gas-tight, which is a requirement for the electrical connection is not degraded by corrosion.

6. No hydraulic tools There is no need of extra hydraulic tools in order to draw through the bush. Only a simple mechanical assembling tool is needed. Use the assembling tool together with a std. torque wrench or a powerful battery driven impact wrench.

 

Le système de connexion par insert développé par SAFETRACK permet la liaison mécanique et électrique entre un câble et le rail.
Ce concept répond aux exigences toujours plus strictes des réseaux ferroviaires : fiabilité, résultat indépendant de l’opérateur, santé du rail préservée.
PRINCIPE DE L’INSERT

59031
SAFEPLUG® HT M12 Single High Torque 120Nm.A4.Drill ø19

Minimum order: 25 pcs

Delivery: 25 pcs per package

 

SAFEPLUG® is the new generation of connection plug with an optimum performance. SAFEPLUG® is included in the SAFETRACK® Silver Bond© Line, together with the PINBRAZING and SAFEBOND® Systems. SAFEPLUG® is developed to have as low transition resistans as possible between the cable lug and the rail in total and not as other plug system where they only show the resistans between the rail and the bush(that is mounted in the hole of the rail). The smart design double the contact pressure and contact surface. 100% plastic strained jointed together. SAFEPLUG® is easily mounted with a simple torque wrench or use the powerful batterydriven impact wrench, SAFE 59110, in the drilled hole in the rail. SAFEPLUG® have, among others, following benefits compare other systems on the market: •  • Double contact surface • Double surface pressure • Simple to install - No special training needed • Can be installed in any kind of weather • The cable lug and the flange of the plug are polished during installation • All contact surfaces are 100% plastic strained together

Meny
Ads
0 Products
Total 0 SEK
Prices excl. VAT