In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Earthing / Grounding Terminals

A complete assortment of earthing terminals for tunnels, bridges, wind power, railways.

See catalogue here.



Search in results
Number of hits 15
4926399
Earthing Cable 50mm²
Donlina /Ej för jordning Donlina 5415454 REU 50 mm² med Jordklämma 0450070 i båda ändar.
4926400
JK360 - JK362  50mm²
Donlina /Även för jordning JK360-JK362
49265
1-Phase Earthing Dev. 50mm²

JK22-JK360 Earthing Dev. 50mm², 1-phase. With 50mm²/11m.

Ref. SS-428 91 01, SS-EN 61230

The device JK22-JK360 is for use on the railway´s catenary line, return line and rail.

Line clamp JK 22 is for connection to the railway´s catenary line 80-120 mm² according to SS 24 01 21 and DIN 43 141, return line Cu 130 mm² or AI 212 mm² or other circular, non-flexible conductors with a diameter of 14 - 19 mm. Insulating poles MGV, MDV/MSV, MTV and operating socket JGS are used to operate the line clamp.

The line clamp conducting parts are made of aluminium bronze and steel components are made of stainless steel. The line clamp has stainlless steel spring washers to ensure constant contact pressure. The earting cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earting cable is connected to the clamp with a cable lug. Connection earting cable-cable lug on the earth clamp is reinforced to increase the life span. Earth clamp JK 360 is made of hardened aluminium and equipped with a contact plate made of nickelplated copper. Other parts are of stainless steel. The clamp has an integrated tool for cleaning the base of the rail. The clamp has a 1/2" connection pin for tightening with e.g. ratchet wrench BV 5217. Earth clamp JK 360 is connected to the base of the rail, which allows rail vehicles to pass.

492652
1-Phase Earthing Dev. 35mm²

JK22-JK360 Earthing Dev. 35mm², 1-phase. With 35mm²/11m.

Ref. SS-428 91 01, SS-EN 61230

The device JK22-JK360 is for use on the railway´s catenary line, return line and rail.

Line clamp JK 22 is for connection to the railway´s catenary line 80-120 mm² according to SS 24 01 21 and DIN 43 141, return line Cu 130 mm² or AI 212 mm² or other circular, non-flexible conductors with a diameter of 14 - 19 mm. Insulating poles MGV, MDV/MSV, MTV and operating socket JGS are used to operate the line clamp.

The line clamp conducting parts are made of aluminium bronze and steel components are made of stainless steel. The line clamp has stainlless steel spring washers to ensure constant contact pressure. The earting cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earting cable is connected to the clamp with a cable lug. Connection earting cable-cable lug on the earth clamp is reinforced to increase the life span. Earth clamp JK 360 is made of hardened aluminium and equipped with a contact plate made of nickelplated copper. Other parts are of stainless steel. The clamp has an integrated tool for cleaning the base of the rail. The clamp has a 1/2" connection pin for tightening with e.g. ratchet wrench BV 5217. Earth clamp JK 360 is connected to the base of the rail, which allows rail vehicles to pass.

49266
BV 5217 Ratchet wrench

BV 5217 Ratchet wrench.

Ref. SS-428 91 01, SS-EN 61230

The device JK22-JK360 is for use on the railway´s catenary line, return line and rail.

Line clamp JK 22 is for connection to the railway´s catenary line 80-120 mm² according to SS 24 01 21 and DIN 43 141, return line Cu 130 mm² or AI 212 mm² or other circular, non-flexible conductors with a diameter of 14 - 19 mm. Insulating poles MGV, MDV/MSV, MTV and operating socket JGS are used to operate the line clamp.

The line clamp conducting parts are made of aluminium bronze and steel components are made of stainless steel. The line clamp has stainlless steel spring washers to ensure constant contact pressure. The earting cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earting cable is connected to the clamp with a cable lug. Connection earting cable-cable lug on the earth clamp is reinforced to increase the life span. Earth clamp JK 360 is made of hardened aluminium and equipped with a contact plate made of nickelplated copper. Other parts are of stainless steel. The clamp has an integrated tool for cleaning the base of the rail. The clamp has a 1/2" connection pin for tightening with e.g. ratchet wrench BV 5217. Earth clamp JK 360 is connected to the base of the rail, which allows rail vehicles to pass.

49269
JGS 28P Operating Socket

 

Operating Socket JGS 18 and JGS 28 P are used in combination with Operating Poles MGV, MDV/MSV and MTV when operating line clamps JK, JSK or JFS.
Operating Socket JGS 28 P is designed with a bayonet fitting, which allows the pole to remain suspended, connected to the clamp.
Operating Socket JGS 18 is made of an insulating material except the gripping mouth, which is made of aluminium. JGS 28 P is made completely of insulating material.
Also available for other types of spindles.

 

Length : 205 mm
Diam : 60 mm
Weight : 0,3 kg 

492690
JGS 18 Operating Socket

Operating Socket JGS 18 and JGS 28 P are used in combination with Operating Poles MGV, MDV/MSV and MTV when operating line clamps JK, JSK or JFS.
Operating Socket JGS 28 P is designed with a bayonet fitting, which allows the pole to remain suspended, connected to the clamp.
Operating Socket JGS 18 is made of an insulating material except the gripping mouth, which is made of aluminium. JGS 28 P is made completely of insulating material.

Also available for other types of spindles.

Length : 205 mm
Diam : 60 mm
Weight : 0,3 kg 

49275
MTV 201-K4  Operating Pole

MTV 201-K4  Operating Pole, Telescopic.

Ref. SS 428 91 05, SS 428 91 10, EN 61230, EN 61235, EN 61243-1

For indoor and outdoor use.

Operating pole MTV-K is used as an insulating pole when earthing and voltage detection are performed. The connector fitting at the poles working end accepts accessories such as operating sockets, torque tools, disconnection hooks, fuse holders and voltage detectors. The pole is fitted with a hand guard that marks where the hand grip section ends and the insulating section starts. This hand guard must not be exceeded when in use. The inner tube must always be extended to its full length when working with this pole. The top tube is sealed to prevent humidity penetrating. The overall length can be infinitely adjusted using the hand grip section.

The insulating pole is made of yellow, fiberglass reinforced polyvinyl ester and has an outside diameter of 55 mm (MTV 150-K5 and MTV 201-K5) or 51 mm (MTV 201-K4 and MTV 230-K4). The connector fitting is made of nylon. The lower end is fitted with a protective cap made of rubber. This pole is also suitable for use with branch and tree cutting tools etc.

Extension sections MSV are available as required (These sections are fitted to the top fitting of the operating pole).

49278
DFO 122 Case

 

Case DFO is designed for storing and protecting insulating poles, branch-cutting poles etc.
The case is made of strong woven plastic with a hook and is closed using a strap
Designed for : MGV-36, MGV-52, MSV 200, MTV 190, MTV 201-K etc.
Length : 2150 mm
Width : 180 mm
Weight : 0,5 kg 

 

49285
TAG SL 200 BV Voltage detector

  • Voltage range 3 – 84 kV AC, 50 Hz, 60 Hz, 16 2/3 Hz, SS-EN 61243-1,CE.
  • Single-Pole Voltage Detector TAG 2000 is for use on overhead transmission lines and switchgear and is designed to check absence or presence of nominal voltage by direct contact to the line. It is usually used prior to earthing operation of a three-phase voltage system.
  • The voltage detector indicates the voltage with acoustic and visual signals. Built in test function with test button provides checking of all electronic and battery level. Green light indicate that the unit is ready (the unit is ready for measurement with or without self-test - permanent stand-by mode). Acoustic signal and red flashing light indicate voltage ”live line”. Solid green light indicates absence of voltage.
  • Indicates on up to three (3) different voltages or voltage ranges between 3 - 80 kV and automatically switches to the voltage range in question.
  • The voltage detector is made of impact resistant polycarbonate and is designed for indoor and outdoor use, operating temperature –25°C - + 55°C.
  • The detector is fitted with a 9 V alkaline battery. It comes equipped with an adapter for mounting on different operating poles, see figure. The unit is delivered with instruction manual, adapter for optional operating poles and both straight and “Y” measurement electrodes

Rated Voltage : 17,5 kV 16 2/3Hz
Measurement Area Ut kV : 4,5
Weight : 0,3 

49288
JK238-JK360 Earthing Device

JK238-JK360 Earthing Device, 1-phase. For catenary line.

Ref. SS 428 91 01, EN 61230

The device is for use as "machine earthing"; protection earthing of normally not live line equipment.

Clamp JK 238 is for connection to steel structures such as frameworks and splints with a thickness up to 30 mm. The clamp is approved for use on painted surfaces and can also be connected to the base of the rail, which allows rail vehicles to pass. Conducting parts of the clamp are made of surface treated spring steel with hardened spikes. Other steel components are made of stainless steel. The loop is made of spring steel to give a constant contact pressure. The screw is insulated.

Clamp JK 360 is made of hardened aluminium and equipped with a contact plate made of nickel-plated copper. Other parts are of stainless steel. The clamp has an integrated tool for cleaning the base of the rail. Earth clamp JK 360 is connected to the base of the rail, which allows rail vehicles to pass. The clamp has stainless steel spring washers, which give a constant contact pressure.

The earthing cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earting cable is connected to the clamp with a cable lug and screwed joint.

49293
JK115 - JK363 1-fas jordningsdon

Ref. SS 428 91 01, EN 61230 The device is for use on the underground's conductor rail and rail.
Line clamp JK 115 is for connection to the base of the underground's 3rd rail. Insulating poles MGV and operating socket JGS or insulation pole MGV/JGS 110 (page 109) are used to operate the line clamp.

The line clamp conducting parts are made of aluminium and the contact plate of surface treated steel with hardened spikes. Other steel components are made of stainless steel. The earthing cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earthing cable is connected to the clamp with a cable lug and bolted/screw joint. Earth clamp JK 363 is made of hardened aluminium and equipped with a contact plate made of nickel-plated copper. Other parts are of stainless steel. The clamp has an integrated tool for cleaning the base of the rail. The clamp has a 1/2" connection pin for tightening with e.g. ratchet wrench BV 5217. The clamps are equipped with stainless steel spring washers, which give a constant contact pressure. Earth clamp JK 363 is connected to the base of the rail, which allows rail vehicles to pass.

Line Clamp : JK 115
Earth Clamp : JK 363
Earthing cable area : 185 mm² 
Rated Current : 60kA/0,1s
Weight : 4,2*

* Incl. cable connection for max earthing cable area. 

49294
JK115-JK72 Earthing Device

JK115-JK72 Earthing Device, 1-phase. f.3rd rail 185mm²/1,2.

Ref. SS-428 91 01, SS-EN 61230

The device is for use on the underground´s conductor rail and rail.

Line clamp JK 115 is connection to the base of the underground´s 3rd rail. Line clamp JK 115 is for connection to the base of the underground´s 3rd rail. Insulating poles MGV and operating socket JGS or insulation pole MGV/JGS 110 are used to operate the line clamp.

 The line clamp conducting parts are made of aluminium and the contact plate of surface treated steel with hardened spikes. Other steel components are made of stainless steel. The line clamp has stainless steel spring washers to ensure constant contact pressure. The earting cable, made of highly flexible ESTPR-insulated copper strands, has sealed cable connections, which prevent humidity from penetrating the cable. The earting cable is connected to the clamp with a cable lug and screwed joint. Earth clamp JK 72 is made of nickel-plated AI-bronze and has a contact plate of surface treated steel. Other parts are of stainless steel. The clamps are equipped with stainless steel spring washers, which give a constant contact pressure.

Earth clamp JK 72 is connected to the railhead.

49296
MGV/JGS 110 Operating Pole max 1000V

Ref. EN 61235
For indoor and outdoor use.
Operating pole MGV/JGS 100 is used as an insulating pole when earthing the current bar the 3rd rail in the underground network. Equipped with a fixed operation socket. The insulating pole is fitted with a hand guard that marks where the hand grip section ends and the insulating section starts. This hand guard must not be exceeded when in use. The insulating pole is sealed to prevent humidity penetrating. The insulating pole is made of yellow, fiberglass reinforced polyvinyl ester and has an outside diameter of 43 mm. The operation socket is made of aluminium. The lower end is fitted with a grip rubber and protective cap made of rubber.

Operating Voltage max : 1,0 kV
Length : Total 1140mm, Insulating Section 500mm, Hand Grip Section 600mm
Weight : 0,9 

Start > Start > Products > Cable connection > Grounding / Short Circuit Equipment
Meny
Ads
0 Products
Total 0 SEK
Prices excl. VAT