In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Search in results
Number of hits 49
593070
Makita BDG800 Straight Grinder 18V cpl.w.2pcs Battery/Charger 220V
Price, VAT excl.4 596.00
SEK
Buy
  • Long-nose type.
  • Round collet nut reduces the risk of damage / scratches on the workpiece.
  • Restart function with warning light.
  • Rubber protection for heat insulation and grip.

Technical information:

  • Maximum wheel size 38mm
  • Speed ??(rpm) 25 000
  • Dimensions (LxWxH) 402x82x118mm
  • Voltage 18V
  • Weight 2.0 kg (5.61 kg for 2pcs 18V Li-Ion battery, charger and bag.)
  • Incl. 2x 18V Li-Ion battery, charger and case.

 

8001
Hole Punch Tool 8mm
The hole punch tool is used to reclaim faulty or used bonds. SAFE 8001: Hole size: Ø 8mm For braze pin: Ø 8mm
8002
Hole Punch Tool 9,5 mm
The hole punch tool is used to reclaim faulty or used bonds. SAFE 8002: Hole size: Ø 9,5mm For braze pin: Ø 9,5mm
8025
Grinding pin for Pinbrazing Ø6mm shaft

PinBrazing require special grinding material.

Using other type of grinding material may leave a non brazeable surface.

8040
Battery tester, Digital
10 second load test ·Unit indicates “CHG” if the pre-test state of charge is not sufficient for proper battery testing.
80481
Charger 36V/110V f. ECONECT 7,5A-110V

Charger 36V/110V f. ECONECT

8055
Battery Charger Car use 12 / 36 V DC
Installation: Connect charger between cigarette lighter socket and pinbraze unit. Charging: Led Red Charging Orange 90% charged Green 100% charged The car charger starts charging only when the D.C. input exceeds 13,5 Volts from the vehicles alternator or generator. The unit will automatically turn OFF/SHUT DOWN when the D.C. input source drops below 13,0 Volts. NOTE! Do not mount the charger where it will be exposed to direct moisture, chemicals or limited air flow. This unit is not designed to be used as a starting device or used with an A.C. Inverter.
80561
Battery Charger Car use ECONECT

Installation:
Connect charger between cigarette lighter socket and pinbraze unit.

Charging:

Led
Red Charging
Orange 90% charged
Green 100% charged

The car charger starts charging only when the D.C. input exceeds 13,5 Volts from the
vehicles alternator or generator. The unit will automatically turn OFF/SHUT DOWN
when the D.C. input source drops below 13,0 Volts.

NOTE!
Do not mount the charger where it will be exposed to direct moisture, chemicals or
limited air flow. This unit is not designed to be used as a starting device or used with
an A.C. Inverter.

8071
Ground Grip 2,7m Max. width=110mm

A ground grip with very high clamping power to use with Safetrack PinBrazing units.

Used for grounding of non-magnetic materials, such as manganese rails or for avoid having to grind for the grounding spot and save some battery capacity.

 

Clamping width: 0-100 mm (0-4").

8092
High Power Battery,sealed,13Ah for S50/S30
When only the best will do! For Motorcycle, ATV, snowmobile, racing, lawn mower, utility vehicle, etc. Genesis batteries are made of pure lead and more lead plates with suspended glass fiber technology (AGM) that allows the battery not toleak acid in case of injury. Why is the Genesis battery superior to other batteries? Lead (not recycled, 1st batch from the mine) Extremely low resistance Excellent for fast download Extremely high power connector Extremely low self discharge (2yrs). Missed trickle charge is not a problem anymore maintenance-free Its high capacity enables lower Ah can be used long life Closed cells - Can be set on edge or be on hand Leaks no acid Excellent in low temperatures (-40 ° C) Voltage (V): 12.0 Capacity (ah): 13.0 Length (mm): 175.5 Width (mm): 83.4 Height (mm): 129.9 Short circuit current: 1400A. Internal resistance of 8.5 Mohm.
8093
High Power Battery,sealed,16Ah for S50/S30
When only the best will do! For Motorcycle, ATV, snowmobile, racing, lawn mower, utility vehicle, etc. Genesis batteries are made of pure lead and more lead plates with suspended glass fiber technology (AGM) that allows the battery not to leak acid in case of injury. Why is the Genesis battery superior to other batteries? Lead (not recycled, 1st batch from the mine) Extremely low resistance Excellent for fast download Extremely high power connector Extremely low self discharge (2yrs). Missed trickle charge is not a problem anymore maintenance-free Its high capacity enables lower Ah can be used long life Closed cells - Can be set on edge or be on hand Leaks no acid Excellent in low temperatures (-40 ° C) Voltage (V): 12.0 Capacity (ah): 16.0 Length (mm): 181.6 Width (mm): 76.3 Height (mm): 167.8 Short circuit current: 1600A. Internal resistance of 7.5 Mohm.
9102
S4-Brazing device, automatic

Advantages of the self adjusting gun:

- S4 requires almost no maintenance unlike other models in the business.

- Elimination of operator error

- Consistent braze quality

- Half the weight

- Quicker and more simple operator training

 

Pinbrazing guns have, until now, been equipped with a manual mechanism to set the lift height of the brazing pin in order to compensate for the different sizes of pins, lugs, ferrules and for manufacturing tolerances. This operation has to be made every time a brazing is to be made.

 

If the operator is not doing this the result is not the same from brazing to brazing.

Safetrack invented the S4 Automatic gun so that the pinbrazing users could be sure that no operator mistakes would occur. The S4 gun sets the correct lift height automatically when gun is brought to the material to which the connection is to be made. The operator has only to fire the gun; errors due to forgetfulness, cold fingers, lack of training, bad light, etc. are eliminated. In addition the new gun, which only weighs about 1.1 kg, is half the weight of earlier versions.

 

The highly appriciated S4 Gun has become a required item to guarantee a safe result at many users world wide.

91035
S4-Angle Head Brazing device
The angle gun makes it possible to pinbraze on the web between two close rails in for example a switch. The height is adjustable between 95-115 mm from the head of the rail.
91061
SL-87 Brazing device 8m/26ft (f.S30XC)

“The most cost efficient way of making retrofit connections to buried pipelines. No need for major excavations!”

The SL-87, 8m long PinBrazing Gun, is used to make Pin Brazings in drilled holes or holes made with vacuum excavation technique (Hydrovac). In as deep holes as 8 meters (26ft) and as small as 7” / 180 mm diameter.

SL-87 is used to pin braze electrical cables ( for cathodic protection or electrical installations) to buried pipes, for example water pipes, gas pipes etc.

With the new gun, the construction company do not need to do costly and large excavations to access the pipe and connect the wires.

The technique is used by EPCOR in Canada for installation of anodes to pipes.

One simply use vacuum excavation (Hydrovac) technique and make a hole about 30cm (1ft) wide down to the pipe.

 

In order to braze in the hole up to 8m (26ft) below surface a video camera is included.

The extended Pin Brazing Gun, made of anodized aluminum, is used together with one of Safetrack’s electronic Pin Brazing units.
The brazing gun has the patented S4 technology which ensures correct lift level and good brazing results.

Max length: 8m (26ft).

Advantages:

Patented automatic brazing gun - No adjustment needed
No need for separate grounding
Make brazings in deep holes (26ft)
Use of brazing pins without fuse wire
Constant energy output. Patent
Lower cost on brazing pins
No "waste" of brazing pins
Low maintenance required

Brazing pins without fuse wire is used. 

 

Length of the gun can be extended with up to 5 pcs of 1,5m(5ft) extender rods which gives a length of 8m (26ft). 

To simplify the operation in deep holes the complete kit, SAFE 91061, includes a video camera to connect with a laptop (not included). 
Each part can also be individually ordered, see below part numbers.

 

Kit SAFE 91061 comes with: 

SL-87 Brazing gun, SAFE 9106110 

5pcs of 1,5m(5 ft) extender rods, SAFE 9106115

Gun cable set, 9m, SAFE 92372

Video Camera, SAFE 591443

Software for camera, SAFE 591444

USB cable 10m, SAFE 511446

Pin holder, 8-9,5mm, SAFE 9211

Ring holder. 8-9,5mm, SAFE 9202


To run the system you are required to add:

Safetrack Pinbrazing equipment S30XC, SAFE 9308CPSL 

SAFE 8049 Battery charger

SAFE 8007040 Rotary bristle tool, 220V

SAFE 8007045 Rotary bristle tool, 110V

SAFE 8007048 Bracket for above bristle tools. Use with extender rods (SAFE 9106115)

 

 

 

 

91062
SL-88 Brazing device f ECONECT

“The most cost efficient way of making retrofit connections to buried pipelines. No need for major excavations!”

The SL-88, 8m long PinBrazing Gun, is used to make Pin Brazings in drilled holes or holes made with vacuum excavation technique (Hydrovac). In as deep holes as 8 meter (26ft) and as small as 7” / 180 mm diameter.

SL-88 is used to pin braze electrical cables ( for cathodic protection or electrical installations) to buried pipes, for example water pipes, gas pipes etc.

With the new gun, the construction company do not need to do costly and large excavations to access the pipe and connect the wires.

The technique is used by EPCOR in Canada for installation of anodes to pipes.

One simply use vacuum excavation (Hydrovac) technique and make a hole about 30cm (1ft) wide down to the pipe.

 

In order to braze in the hole up to 8m (26ft) below surface a video camera is included.

The extended Pin Brazing Gun, made of anodized aluminum, is used together with Safetrack’s electronic Pin Brazing unit, ECONECT.
The brazing gun has the patented S4 technology which ensures correct lift level and good brazing results.

Max length: 8m (26ft).

Advantages:

Patented automatic brazing gun - No adjustment needed
No need for separate grounding
Make brazings in deep holes (26ft)
Use of brazing pins without fuse wire
Constant energy output. Patent
Lower cost on brazing pins
No "waste" of brazing pins
Low maintenance required

Brazing pins without fuse wire is used. 

 

Length of the gun can be extended with up to 5 pcs of 1,5m(5ft) extender rods which gives a length of 8m (26ft). 

To simplify the operation in deep holes the complete kit, SAFE 91061, includes a video camera to connect with a laptop (not included). 
Each part can also be individually ordered, see below part numbers.

 

Kit SAFE 91062 comes with: 

SL-88 Brazing gun, SAFE 9106111 

5pcs of 1,5m(5 ft) extender rods, SAFE 9106115

Gun cable set, 9m, SAFE 92372

Video Camera, SAFE 591443

Software for camera, SAFE 591444

USB cable 10m, SAFE 511446

Pin holder, 8-9,5mm, SAFE 9211

Ring holder. 8-9,5mm, SAFE 9202


To run the system you are required to add:

Safetrack Pinbrazing equipment ECONECT, SAFE 94451

SAFE 8007040 Rotary bristle tool, 220V

SAFE 8007045 Rotary bristle tool, 110V

SAFE 8007048 Bracket for above bristle tools. Use with extender rods (SAFE 9106115)

 

9202
Ring holder 8-9,5 mm f. S4
Ring holder 8-9,5 mm f. S4. For use of 8 mm rings and 9.5 mm rings in Safetrackt guns.
9204
Ring holder 12 mm, f. S4 for M8/M10/M12/SnakeBite
Ring holder 12 mm f. S4. For use of 12 mm rings in Safetrackt guns.
9211
Pinholder 8-9,5 mm (A) also for SnakeBite
The pin holder 8-9.5 mm (A) for Safetrack's guns. The pin holder is used for 8mm, 9.5mm brazing pins and also for snakebite.
9213
Pin holder M8 (B) With Internal Thread
The pin holder M8 (B) for Safetrack's guns. The pin holder is used for M8 threaded brazing pins
9215
Pin holder M10 (C) With Internal Thread
The pin holder M10 (C) for Safetrack's guns. The pin holder is used for M10 threaded brazing pins.
9217
Pinholder M12 (D) With Internal Thread
The pin holder M12 (D) for Safetrack's guns. The pin holder is used for M12 threaded brazing pins.
9227
Extension set gun S4. 8-9,5
It is possible to extend the pin and ringholder with a extension set where there is little space. L=150 mm Cpl. set for: 8-9,5 mm SAFE 9227 M8 SAFE 9228 M10 SAFE 9229 M12 SAFE 9231
9229
Extension set f.S4, M8/M10/M12

It is possible to extend the pin and ringholder with a extension set where there is little space. L=150 mm Cpl. set for: threaded brazing pins (M8/M10/M12): part No. SAFE 9229.

9318
Battery adapter S30/X31 for separate charging

Charging adapter for seperate charging of the batteries when using extra battery box for pinbrazing unit S30XC.

Increase the brazing capacity.

9320
Batt. box f.S30XC/X31 for 16Ah With cables, lid. Ex. Bat.

Extra battery box for S30XC Pin Brazing unit and made for 16Ah batteries.

Delivered with lid and carrying handle and with cables for connecting to the batteries. Exclusive batteries.

Note! Add 3pcs of batteries (SAFE 8093) and a charging adapter(SAFE 9318) for seperate charging of the batteries.

9361
Handy 2, Trolley f. S30 XC/X31 (PB unit not included)

Accessories for Safetracks® PinBrazing equipment, S30XC, to roll the unit on railway track.

Holder for the brazing gun, grinding machine and work materials.
Handy 2 snaps onto the unit that is prepared for this accessory.

93690
Carrying harness for ECONECT
  • Easy acessories to carry the equipment on the back.
  • Econect is easy to apply to the carrying harness.
  • Low weight 3,5 kg

    Commentary from a satisfied customer:

    "Carrying harness
    works great and the guys are happy, then I am satisfied.
    The unit is a big boost and worth every penny."


    Martin
    Hjälle, Project leader Strukton Rail

95240
Carrying case f. PB/SB

Heavy Duty case for Safetrack® pin brazing and SafeBond® equipment.
Note, does not contain the tools on the pictures.

Meny
Ads
0 Products
Total 0 SEK
Prices excl. VAT