In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

 

Cable tools

Safetrack distribute a complete assortment of cable lugs and connectors in highest quality, made in German by Weitkowitz® which guarantees a safe connection.

See catalogue here.

Search in results
Number of hits 17
62690701
Crimp tool WZ 1. cpl set
2 396.00
SEK
Buy

Crimping tool WZ 1 cpl set. with case.

Including press dies for:

  • for insulated terminals, connectors and disconnectors of 0.5 to 6 mm²
  • for noninsulated terminals, cable lugs of 0.5 to 10 mm²
  • for cord-end-sleeves of 0.5 to 16 mm²
  • for noninsulated male and female disconnectors of 0.5 to 2.5 mm², tab width 4.8 mm² + 6.3 mm²
  • for BNC and TNC coax connectors RG58, RG59, RG62 and RG71 conductors
752012
Transport Case for MP1
836.00
SEK
Buy

Transport case for crimping tool type Elpress T2600 / MP1

7520D
Crimping tool 10-120mm²
5 996.00
SEK
Buy

Quick Supply. 10-120 sq.mm.

Likewise type Elpress.

Robust and handy precision tool with ratchet gearing for crimping
cable lugs and connectors up to 120 mm². The looking device
guarantees a constantly optimal crimping depth and quality.
Advantages:
– compact construction form, only 420 mm long
– small weight, appr. 2 kg
– press capacity: approx. 55 kN
– hinged head
– low effort due to ratchet gearing
– mechanical, therefore no problems because of dirt
or oil leckage

75221140
Crimping tool AZ 14
1 772.00
SEK
Buy

Crimping tool with releaseble locking device for consistently high Crimping quality. The ergonomically formed, soft cushioned 2 components handle guarantees a convenient usage. Automatic cross-section adapting crimping tools for cord end sleeves. 

  • Cross-section : 0,08-16mm²
  • Crimping range : 13mm
  • Compression dies : for crimping insulated terminals

Length: 175mm
Weight: 0,410Kg 

75221160
Crimping tool AZ 35
1 640.00
SEK
Buy

Crimping tool with releaseble locking device for consistently high Crimping quality. The ergonomically formed, soft cushioned 2 components handle guarantees a convenient usage. Intensive round crimping suitable for confined space and thinned conductor terminal.

  • Cross-section : 0,14-2,5mm²
  • Crimping range : 12mm

Length: 200mm
Weight: 0,345Kg 

75221180
Crimping tool AZ 37
1 640.00
SEK
Buy

Crimping tool with releaseble locking device for consistently high Crimping quality. The ergonomically formed, soft cushioned 2 components handle guarantees a convenient usage. Intensive round crimping suitable for confined space and thinned conductor terminal.

  • Cross-section : 1,5-6mm²
  • Crimping range : 12mm

Length: 200mm
Weight: 0,345Kg 

75221200
Crimping tool AZ 39
1 640.00
SEK
Buy

Crimping tool with releaseble locking device for consistently high Crimping quality. The ergonomically formed, soft cushioned 2 components handle guarantees a convenient usage. Intensive round crimping suitable for confined space and thinned conductor terminal.

  • Cross-section : 10-16mm²
  • Crimping range : 18mm

Length: 200mm
Weight: 0,345Kg 

75221220
Crimping tool AZ 42
1 272.00
SEK
Buy

Crimping tool with releaseble locking device for consistently high Crimping quality. The ergonomically formed, soft cushioned 2 components handle guarantees a convenient usage.

  • Cross-section : 0,14-16mm²
  • Crimping range : 12mm

Length: 230mm
Weight: 0,485Kg 

75221240
Crimping Tool WZ 6
1 380.00
SEK
Buy

Crimping tool for crimping noninsulated terminals, tubular cablelugs and connectors of the standard-series from 0.5 to 16 mm².
The ratchet guarantees a permanent high quality crimping result.

Length: 240 mm

75270150
Pressing tool HYCP 240
7 796.00
SEK
Buy

Features:
Light weight, compact and slim design
Accepts BEKU type dies
Yoke and Latch type head for easy die changes and removal of connectors
Adjustable ram stroke, 10-15 mm to minimize pumping action
Built-in bypass relief valve
Small handle spread for close quarter applications

Specifications:
Length: 375 (L)mm
Weight: 2.8 kgs
Max. Pressure: 550 bar
Oil Required: 56 cc
Max. Output: 5.2 kN

Benefits:

  • Light weight, compact and slim design
  • Yoke and Latch type head for easy die changeover and easy removal of jointed conductor
  • Small handle spread
  • Built-in bypass relief valve
75270301
Crimping Tool NMBT N36
11 996.00
SEK
Buy

Model No. NMBT N36

Weight: 2,3 kgs (battery included)

Specifications

Drive unit: 18V DC Motor

Charger (GS/CE):

Input voltage110V Single Phase AC

Input voltage230V Single Phase AC

Input frequency50-60 Hz

Input current21.75 VA

Reservoir capacity120 cc 

Crimping Capacity:

 

Max Output 4 tons / 39 KN

 

Use for:

KRF 10-70 mm­²

KRT 10-95 mm²

KRD 16-70 mm²

C6-C11

 

Features:

  • Light weight, compact and slim design.
  • Automatic low/high-pressure conversion with rapid/slow operating motion.
  • 350º rotating head for convenient operation.

    Accessories:

    Plastic carrying case

    18V Li-lon Battery , 110V or 230V Charger

75272020
Stilo 20
18 900.00
SEK
Buy
  • Battery powered hydraulic pressing tool 60kN.
  • Hexagonal dies pressing for DIN cabel lugs and connectors, Cu up to 300 mm² and Al up to 240 mm²
  • Characteristics : light, compact and robust design
  • Ergonomic design for land and right handed
  • Extremelt fast processing due to a three-stage axial pistom pump
  • Autmomatic pressure limits and monitoring through pressure sensor
  • Smooth start and quick stop function for long life
  • Engine shutdown and automatic return after completed pressing
  • Electronic control and monitoring of the pressing process
  • Manual reversion in each position
  • Automatic sleep mode after 5 minutes
  • Intergrated, intelligent electronics with multifunction LED
  • Saves all pressings and error messages on the internal memory
  • Integrated service management
  • Fast retractopn with high production rate
  • Mini-USB-port for common computer system
  • Li-Ion battery 18V 1.5Ah with charging
  • Max. stroke: 16 mm
  • Pressing force: 60 kN
  • Size (battery inkl.): 370 x 123 x 80 mm
  • Vikt inkl. battery: 3,3 kg

Comes with :
Plastic hydraulic toolbox for tolls and collets.
Li-lonen battery and charger.
Manual software and USB cable.

7583210
Cordless Crimping tool STILO1
12 996.00
SEK
Buy

 

Battery powered crimping tools that can press 10 to 150 mm ². Uses same dies (TB or NH) as ELPRESS T2600 / MP1 and ELPRESS PVL611.

 

 

  • Presses up to 150 mm ².
  • 45kN of press force.
  • Comes with case and a charger.
  • Battery type Li-Ion 18V, 1.5 Ah.
  • LED indicator for charging status.
  • Weight 2.3 kg.
7584000
Batt.-powered compression tool
21 996.00
SEK
Buy

Battery-powered hydraulic pressingtool for crimping cable lugs
and connectors up to 240 mm²

Advantages:

  • Extremely quick processing due to a two-stage hydraulic pump
  • 270° revolving head with quick opening and closing
  • Integrated pressure relief valve, false pressings cause no damage at tool nor dies
  • Lithium-ion-battery without memory effect, self discharges very low
  • High capacity due 3.0 Ah battery
  • Fastening eye for balance and carrying strap available
  • Ergonomic handle with a balanced weight distribution for sure work free of tiredness
  • Case, handle shell and pressure discharge key completely from isolated and push-firm plastic material
  • Universal usage: dies for all versions of cable lugs and connectors are available
  • Integrated electronic module for:
    • Permanent accumulator-loading state control
    • Supervision of the working process and state announcement
    • Announcement of the next service intervall
    • Mistake announcement at possible disturbances

Delivery completely with battery, battery charger and supporting
loop for transport and safety, transport plastic case

Technical data:
Press capacity:..............................................approx. 60 kN
Operating voltage:.................................................14.4 Volt
Tool measurements:...............B 95 x L 360 x H 330 mm
Weight:................................................3.6 kg (incl. battery)
Battery charger:.........220 – 240 V, 50–60 Hz, 7.2-18 V

7584120
Batt.-powered compression tool
26 900.00
SEK
Buy
– C-head, ideally for continous quick working (side loading of connectors) – ideal for series-production – extremely quick processing due to a two-stage hydraulicpump – 360° revolving head – application range from 6 up to 300 mm² – integrated pressure relief valve, false pressings cause no damage at tool nor dies – lithium-ionen-battery without memory effect, self-discharges very low – high capacity due to 3.0 Ah battery – eyelet balancer and carrying strap available – ergonomic handle with a balanced weight distribution for sure work free of tiredness – case, handle shell and pressure discharge key completely from isolated and push-firm plastic material – integrated electronic module for: • permanent accumulator-loading state control • supervision of the working process and state announcement • announcement of the next service interval • mistake announcement at possible disturbances
Meny
Ads
0 Products
Total 0 SEK
Prices excl. VAT