In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Search in results
Number of hits 16
97220
SOLA GW80 Superelevation Track gauge 1435

Combined gauge and track cant meter
Gauge 1435 mm

97225
SOLA SW91 1435mm
Gear track gauge (meter gauge)
97230
SOLA SW9140
Combined control width, track width and track cant measuring type SOLA SW 9140
97235
SOLA SW9140/Z
Combined control width, track width and track cant measuring type SOLA SW 9140 / Z, divisible.
97240
SOLA ULM87
Meters for lower gauge.
97249
Digital switch/cant RCAD 1435 Narrow  short   Probes Z= 14mm

Digital switch gauge and cant measuring device from Vogel & plötcher.

The benefits of digital measuring with this device are convincing: the use of the device is simplified and an even higher level of accuracy and safety is offered, too.

It shows the measured values on a clear LCD-display. This means that all required data are easily seen at a glance while reading errors or inaccuracies are successfully avoided.

Because of the back-illuminated LCD-display measurement operations in gloaming or darkness are also supported.

+ digital measuring

+ data capture with accuracy of 1/10 mm

+ illuminated LCD-display

+ values can be saved on SD-memorycard

Effective ranges (for gauge 1435 mm)
Track gauge: 1366 - 1475 mm
Check rail gauge: 1346 - 1455 mm
Back-to-back distance: 1326 - 1435 mm
Flangeway clearance: 20 - 128 mm
Cant: ± 200 mm
 
Dimension and weight: 
Length x Width x Height: 104 x 1618 x 156 mm
Weight: 2,8 Kg
 
Special features 
The device is insulated and officially approved by DB.
Power supply by 2 x 1.5 V batteries (type AA).
 
Note 
This is available for other track gauges, too.
(i.e. 1000 mm, 1524 mm, 1668 mm).

By default the device's electronics are prepared for operation from -10°C up to +45°C.
In general any measurement below 0°C may cause restrictions or poor results
due to ice on track, temperature influence on material etc. Furthermore the
LCD display reacts more slowly and battery lifetime is reduced, too, at low temperature.

 
972490
Digital switch/can 1435  RCAD BT-memory Narrow  short   Probes Z= 14mm

Digital switch gauge and cant measuring device from Vogel & Plötcher.

The benefits of digital measuring with this device are convincing: the use of the device is simplified and an even higher level of accuracy and safety is offered, too.

It shows the measured values on a clear LCD-display. This means that all required data are easily seen at a glance while reading errors or inaccuracies are successfully avoided.

Because of the back-illuminated LCD-display measurement operations in gloaming or darkness are also supported.

+ digital measuring

+ bluetooth

+ data capture with accuracy of 1/10 mm

+ illuminated LCD-display

+ values can be saved on SD-memorycard

 

Effective ranges (for gauge 1435 mm)

Track gauge: 1366 - 1475 mm

Check rail gauge: 1346 - 1455 mm

Back-to-back distance: 1326 - 1435 mm

Flangeway clearance: 20 - 128 mm

Cant: +- 200 mm

 

Length x Width x Height: 104 x 1618 x 156 mm

Weight: 2,8 Kg

 

Special features

The device is insulated and officially approved by DB.

Power supply by 2 x 1.5 V batteries (type AA).

Note This is available for other track gauges, too.(i.e. 1000 mm, 1524 mm, 1668 mm).

 

 

By default the device's electronics are prepared for operation from -10C up to +45C.

In general any measurement below 0C may cause restrictions or poor results due to ice on track, temperature influence on material etc. Furthermore the LCD display reacts more slowly and battery lifetime is reduced, too, at low temperature.

 
972491
Transport Case for RCAD Aluminium

Well padded aluminium case for tranport and safekeeping.

97250
RCS Gauge/cant measure device V&P RCS 1435  Insulated

Effective ranges (for gauge 1435 mm)

Track gauge: 1415 - 1500 mm
Cant: -30 to +200

Dimension and weight

Length x Width x Height: 1643 x 100 x 165 mm
Weight: 2,5 kg

Special features The device is insulated and officially approved by DB.
RCS is available for other track gauges, too (i.E. 1000 mm, 1524 mm, 1668 mm).

97252
RCA 1435 Measure device V&P RCA 1435

Effective ranges (for gauge 1435 mm):

Track gauge: 1415 - 1475 mm
Check rail gauge: 1385 - 1405 mm
Back-to-back distance: 1344 - 1361 mm
Flangeway clearance: 30 - 83 mm
Cant: -30 to +200 mm
 
Dimension and weight:

Length x Width x Height: 1618 x 100 x 165 mm
Weight: 2,5 kg
 
Special features
The measuring device is insulated and officially approved by DB.

Note
RCA is available for other track gauges, too
(i.E. 1000 mm, 1524 mm, 1668 mm).

97254
RCA-T 1435 Measure device V&P RCA-T 1435 separable

Effective ranges (for gauge 1435 mm):

Track gauge: 1415 - 1475 mm
Check rail gauge: 1385 - 1405 mm
Back-to-back distance: 1344 - 1361 mm
Flangeway clearance: 30 - 83 mm
Cant: -30 to +200 mm
 
Dimension and weight:

Length x Width x Height: 1618 x 100 x 165 mm
Weight: 2,5 kg
 
Special features

Optional: Carry bag can be purchased SAFE 972542.
The measuring device is insulated and officially approved by DB.

Note
RCA is available for other track gauges, too
(i.E. 1000 mm, 1524 mm, 1668 mm).

97256
MUL 1435 Measure device V&P MUL 1435 foldable  Max. height 550mm

Effective ranges ( for gauge 1435 mm):

Track gauge 1425 to 1475 mm
Extension - 70 to + 160

Dimension and weight:

L x W x H ( in operation) 2715 x 104 x 620 mm
Weight ~4,9 kg

9725635
RMF 2.3E Digital  Corrugation Measuring System V&P

Scope of supply

  • Measuring device RMF (mobile) with automatic continuous data capture.
  • Battery incl. quick-charging unit.
  • Outdoor-Notebook, MPC ( Windows OS, IP65 protected, splash-proof, transreflective touch-screen-display).
  • Software RMFcatcher 4.x - data capture and real-time-display.
  • Solid case for transport and safekeeping.

Features

  • Electronic-digital measuring system for surveying the primary rail length profile.
  • Patented, worldwide proven measuring principle with 0,01 mm resolution.
  • Automatic-continuous measuring mode with sampling rate of 2 mm.
  • Simultaneous measurement of left and right rail.
  • Rail profile waves from 10 mm to 3000 mm lengths are detected.
  • Allmeasurement data are displayed in real-time.
  • Powerful software package incl. interface for data export (*.txt).
  • Free text (i.e. comments, track defects) can be entered during measurement.
  • Modular device design: only one person required for assembling and operation.
  • Measuring device is prepared for both, use on gauge 1435 and 1000 mm.
  • RMf 2.3E complies to standard EN 13231-3:2012.
  • RMf 2.3E is insulated and officially approved from Deutsche Bahn (DB).

Technical Data

  • Nominal track gauge:1435 mm and 1000 mm
  • Measuring range sensor: -3,5 to + 2,5 mm
  • Sampling rate: 2mm
  • Measurement resolution: 0,01 mm
  • Dimensions (L x W x H), in operation: 2200 x 1680 x 780 mm
  • Dimensions (L x W x H), in transport case: 460 x 1800 x 4710 mm
  • Weight: 45 kg

Options and Accessories

  • Software: Program RMviewer for graphic and numeric analyses of the measured data incl. evaluation acc. to DIN EN 13231-3. Flexible single-user licence provided as USB-dongle for office computer or notebook. System Requrements: Windows XP / 7. Artnr: 9725638
  • Device extensions: Modification kit for enabling RMF for operation on grooved rails (tramway). Artnr: 9725640

 

97280010
STI-1435 Track and turnout gauge, 1435mm Digital Solar STI
  • Track gauge: -20 i/+ 45 mm 
  • Cant: -/+ 250 mm
  • Right and left grooves 26 mm - 75 mm
  • Full range of giding gauge and gauge widths
  • Measurement accuracy +/- 3 mm
  • Weight: 2,8 kg
  • Operating temperature: -20 - +45
    temperature-compensated measurements results
  • Humidity: 15 -/. 85% (no condensation)
  • Backlit display, legible even in direct sunlight
  • 97280200
    Graw Track and turnout gauge DTG
    • Spårviddsmätning -20 mm ./2 + 55 mm
    • Rälsförhöjning +/- 200 mm
    • Höger och vänster spår, kopplingspunkt gap: upp till 200 mm
    • Spårviddsmätare och spårviddsbredder - hela området
    • Exakthet +/- 0,3 mm
    • Vikt 2,4 kg
    • Minneskapacitet: 500 km spår eller 1000 växlar
    • Driftstemperatur -20. + 45°C; temperaturkompensering avläsningar
    • Bakgrundsbelyst display, läsbar även i direkt solljus
    • Instrumentet är isolerat, redo att arbeta omedelbart efter påslagning
Meny
Ads
0 Products
Total 0 SEK
Prices excl. VAT