Your browser is not supported. For the best experience, a newer version or another browser is recommended.
HEATY 300. L=300mm
HEATY 300. L=300mm

HEATY 300. L=300mm

Part No 4045
Weight (kg) 13.7
E-mail for price
SEK
In stock
Product question

What would you like to know about HEATY 300. L=300mm?

Send

Description

The rail heater HEATY is an oven for even and precise preheating of rails before welding. HEATY can also be used for the gradual cooling of welds to prevent brittle fracture.

HEATY consists of three propane burners using the Bunsen principle. HEATY 600 can heat 24 inch / 600 mm at the same time.

Heating with HEATY means:
• Even heat distribution
• Exact and even holding heat
• Only propane necessary
• Easy to handle
• Fast heating
• Adjustable heaters

How to use HEATY
Place HEATY on the rail and connect it to the propane cylinder regulator by means of tubing.

Preheating of welding area
Adjust the regulator to a pressure of 2 bar and open the three valves of the burners completely. Light the burners and readjust the pressure to 2 bar.
After 5 minutes(8min. f. Heaty 600) HEATY provides a preheating tempera- ture of 350°C / 660°F.

Post-heating of weld area
Shut down the upper burner and adjust the regulators to 0.5 bar. HEATY will then keep a temperature of 625-675°C / 1160-1250°F on the rail, web and base for 10 minutes. Even heating and even cooling are essential for a durable weld.

HEATY could with advantage be used together with gas bottle heater SAFE 4052 during use in cold weather to increase the output of gas in the bottle.

Heat-up time
HEATY 300 350°C / 660°F at 2 bar: 5 min
HEATY 600 350°C / 660°F at 2 bar: 8 min

More ...Close
SESwedish - SEK
Choose your settings
The product has been added to your shopping cart Show shopping cartCheckout