Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
"Royston Handy Cap IP. 4x4"" (101x101mm)"

Royston Handy Cap IP. 4x4" (101x101mm)

Art nr: 46455
Vikt (kg) 1.8
Maila för pris
SEK
I lager
Produktfråga

Vad vill du veta om Royston Handy Cap IP. 4x4" (101x101mm)?

Skicka

Beskrivning

Corrosion protection of thermite welds and Pin Brazings

Handy Cap IP™ is a prefabricated assembly designed to provide quick, field-applied corrosion protection to anode and test lead wire welds on metal pipe and tanks. This economical product is ideal for use in limited access applications. New Handy Cap IP now adds the innovative technology of Tapecoat Gray Adhesive to its unique design. The integration of a primer in Tapecoat Gray makes field application of Handy Cap IP easier and more economical.

Exothermic Weld Grounding Connection

No Liquid Primer Needed
Easy Field-Applied Corrosion Protection
Ideal for Keyhole Applications
Dome and Tunnel Provide Easy Access
Tapecoat Gray Adhesive Eliminates Liquid Primer
Elastomeric Compound Encases Weld Profile
Serrations Conform to Small Diameters

One pack contains 20 pcs of Handy Cap IP.

Typical Properties:

Construction - Molded plastic dome filled with corrosion resistant compound on a base of thick elastomeric tape.

Dimension:Overall: 4” x 4”
Plastic Sheet: 2.75” x 4” (serrated)
Sheet Thickness: 10 mils
Plastic Dome: 1.625” diameter/ .8” height
Adhesive Thickness: 165 mils
Weight: 2.8 oz
Application Temperature: -20°F to 120°F (-29°C to 49°C)
Service Temperature: -40°F to 150°F (-40°C to 66°C)
Shelf Life: Rotate yearly

 

Application Information

1. Clean all mud, dirt, grease, oil and other contaminants from the metal surface and mill coating which is to be covered. The Handy Cap IP incorporates an integrated primer in its Tapecoat Gray Adhesive and does not require the use of a liquid primer prior to application.

2. Remove the release paper from the bottom of the Handy Cap IP. Bend the plastic sheet inward at the serrations when applying to small diameter pipe. Position and place the Handy Cap IP on the welded area with the tunnel over the lead wire.

3. Push the dome of the cap firmly into the weld area. Lift the lead wire away from the pipe and squeeze the adhesive compound completely around and underneath the wire. Push the lead wire back down on the pipe and press the elastomeric compound into firm contact with the pipe over the entire area.

No further protection is required when the Handy Cap IP covers the entire exposed metal area. Uncovered areas should be protected with primerless Tapecoat or Royston tapes. Remove the narrow plastic release film to accommodate tool use for keyhole applications.

Läs mer ...Stäng
SESverige - SEK
Välj dina inställningar/Choose your settings
Produkten har lagts i din varukorg Visa varukorgenTill kassan