“The most cost efficient way of making retrofit connections to buried pipelines. No need for major excavations!”
The SL-87, 8m long PinBrazing Gun, is used to make Pin Brazings in drilled holes or holes made with vacuum excavation technique (Hydrovac). In as deep holes as 8 meters (26ft) and as small as 10”/250 mm diameter. SL-87 is used to pin braze electrical cables ( for cathodic protection or electrical installations) to buried pipes, for example water pipes, gas pipes etc.
With the new gun, the construction company do not need to do costly and large excavations to access the pipe and connect the wires.
The technique is used by EPCOR in Canada for installation of anodes to pipes.
One simply use vacuum excavation (Hydrovac) technique and make a hole about 25 cm (10") wide down to the pipe.
In order to braze in the hole up to 8m (26ft) below surface a video camera is included.
The extended Pin Brazing Gun, made of anodized aluminum, is used together with one of Safetrack’s electronic Pin Brazing units.
The brazing gun has the patented S4 technology which ensures correct lift level and good brazing results.
Max length (depth): 8m (26ft).
Advantages:
- Patented automatic brazing gun - No adjustment needed
- No need for separate grounding
- Make brazings in deep holes (26ft)
- Constant energy output. Patent
- Lower cost on brazing pins
- No "waste" of brazing pins
- Low maintenance required
- Brazing pins without fuse wire is used
- Video Camera included
- NOW! Included Heavy Duty Bags!
Length of the gun can be extended with up to 5 pcs of 1,5m(5ft) extender rods which gives a length of 8m (26ft).
To simplify the operation in deep holes the complete kit, SAFE 91061, includes a video camera to connect with a laptop (not included). Each part can also be individually ordered, see below part numbers.
Kit SAFE 91061 comes with:
- SL-87 Brazing gun, SAFE 9106110
- 5pcs of 1,5m (5 ft) extender rods, SAFE 9106115
- Gun cable set, 9m, SAFE 92372
- Video Camera, SAFE 591443
- Software for camera, SAFE 591444
- USB cable 10m, SAFE 511446
- Pin holder 8-9,5mm, SAFE 9211
- Ring holder 8-9,5mm, SAFE 9202
To run the system you are required to add:
- SAFETRACK PinBrazing equipment S30 X/C, SAFE 9308CPSL
- SAFE 8049 Battery charger
- SAFE 8007040 Rotary bristle tool, 220V
- SAFE 8007045 Rotary bristle tool, 110V
- SAFE 8007048 Bracket for above bristle tools. Use with extender rods (SAFE 9106115)